It is perfectly suitable for the construction of trendy looking concrete or stone-effect surfaces in your home on plastered, plastered sidewalls and ceilings. After preparing these basics with gel, lay them with a HARZO Penetrating Primer before you start decorating! A great advantage of the LOFT material, if you have been a little sloppy, it will compensate for and correct minor defects!
Stir thoroughly, then with creative movements, stainless steel tools, filler iron, spatula in a thin layer (About 0.6 kg per layer), filler in one layer. Later, after about 20-30 minutes, smooth it with gentle, then continuously strengthening movements. Work with stainless steel until the texture begins to emerge. Discolouration of the texture during your fillering movements and how hard you press filler iron on it will always result in shades of light gray and dark gray. The shape of the texture depends on how you shape the wet material during application. After the wet material is picked up and molded, the small cans will be coloured in several shades along the protrusions on the drying material, under the influence of fillering. After the LOFT material has been completely dried, it will have the same resistance as a very high-quality wall painting. On demand, you can protect its surface. You can achieve this protection with the colourless HARZO Wall protector-glaze. This impregnation makes the surface of the wall washable and resistant. You can also use HARZO LOFT Structure coating glazing material as a decorative material for HARZO tile renovation systems!
The HARZO LOFT Structure coating requires five times fewer colouring pastes than indoor and outdoor wall paints, so its colouring is much more economical than traditional wall paints!
Drying time: 1-2 hours
Transferability: can be repaint after 4 hours
Coverage: approx. approx. 0.6 kg/m2/layer
Packaging:
- 3 kg
- 6 kg
- 15 kg
If you have any questions about the HARZO LOFT Structure coating product, please contact us at [email protected] email address.
Help with the use of the material: