The premixed quartz-grained HARZO-fix compensative filler material is suitable for repairing and leveling major defects indoors, plastered wall, drywall, concrete, metal based on anti-corrosion, aluminium, zinc, OSB sheets and these surfaces, for repair, glazing, up to a thickness of 1-5 mm. It can be applied in one or more layers, retains its shape, is well sanded.
Drying time:
At an air temperature of 22 °C, at a thickness of 1-3 mm, after 2-4 hours it forms an easy-to-sand hard, flexible surface. Surface condition: The base surface must be clean, dust-free, firm and wearable. Anti-adhesion agents must be removed from the base surface. It is recommended that you check the properties of the base surface by performing a test fix.
Application:
With hand-trowel tool approx. up to 1-5 mm thickness. Before use, the substance should be mixed to a creamy consistency. The material should only be applied at a temperature of 8-30 °C. Filling a recess of 1-5 mm is enough to carry out in one layer, in which case it is necessary to take into account the meaningful extension of the drying time. After drying, it can be sanded if necessary with a HARZO-Trowel filler, after which it can be repainted with any aqueous dispersion or solvent paint.
Dilution:
Up to 3% with water if the workflow requires it.
Coverage:
In a thickness of 1 mm, about 0.6-0.8 kg/m2/layer, depending on the surface.
Packaging:
- 3 kg
- 6 kg
- 10 kg
- 20 kg
If you have any questions about the HARZO Compensative Filler product, please contact us at [email protected] email address.
