Field of application:
Rationed to plasters, thin and thick-blind plasters, non-absorbent bases such as latex painting and oil painting, panel flat concrete wall, OSB sheets, aluminium, glass, etc. With the Power-B additive, an excellent STABLE and SAFE filler base can be made for the preparation of vinyl, vlies, and normal wallpapering. With the addition of a larger amount of water to the Power-B additive, high-quality plaster can be found on plasterboard and drywall before wall painting. The stronger adhesive tapes that we glue to the painted surface for masking do not tear off the glazed material when they are removed!! With Power-B, the finishing plaster materials do not crease up in the process of glazing, so there is no need to base it between the last filler layers, so a complete workflow can be skipped. Latex and dispersion paint-painted walls are thinly glazed for repair purposes, so that the dried gypsum does not dust out from the small defects, but it remains easy to grind, but it can also be processed in a thick layer. After drying the first layer of paint applied after drying, the filler material mixed with the Power-B additive has to be fligned with minimal or no fliking!
Added to tile adhesives:
High-quality, brushable, cylindrical bridge-forming material can be made, which adheres to non-absorbent foundations such as tiles, OSB sheets, aluminum, and is also the perfect solution for laying substrate equalizers before covering. After drying the surface of the bridge-forming foundation material thus prepared, it can be covered with a traditional flexible tile adhesive. If you do not wish to use a Special Primer, mix the Power-B additive into the tile adhesive based on the recommended mixing ratios, which then sticks directly on the work surface.
- 1 litre
- 2 liters
- 5 liters
Its coverage varies depending on the task, it can be calculated according to the table below.
If you have any questions about HARZO Power-B, please email us at email@example.com.