Its light, soft properties allow for a variety of decorative solutions, on walls, floors, ceilings, but on any receptionable surface, such as tiles, ceramic glass, etc. Its versatility is shown by the fact that even the broken tiles, vases and yard decorations can be repaired and glued with good results. (Therefore, the residue should not be discarded early.)
Very smooth surfaces, e.g. glass, tiles, it is worth preparing them with a HARZO T16 primer to avoid slipping. The material is applied with a painting roller, after which it can be further modelled with almost anything. On larger surfaces, lightly bent stainless steel filler iron are recommended, but they can be a variety of paint rollers, brushes, spatula, or even on smaller concave surfaces, tablespoons, rarity spoons or silicone shovels used in kitchens.
If possible, it does not need to be diluted, because it is mixed with the most optimal consistency at the factory! It can be coloured with any colouring that can be diluted with water. Thanks to its high humidity permeability, it is also suitable for the restoration of monuments.
Before applying, it is necessary to clean the surface or remove the detaching parts. Drying time under optimal conditions cca. three to six hours. Its foundation is the HARZO Penetrating primer.
For more information, see
- 3 kg
- 6 kg
- 10 kg
- 20 kg
about 1 kg / 1 m2 / layer
Why HARZO-3 3?
Because it is a product capable of 3 different tasks with a single application. It covers, coloures and forms texture.
What textures can be formed?
Whatever they are! HARZO-3 is a sour cream coverage material that can be applied to the wall with various tools to suit our own tastes.
How to prepare the surface?
What is very important is the dust-free and removal of the substilled parts. Since the material has a thickness, the base surface does not need to be completely smooth. Multiple glazing and grinding can be omitted. A roughly full surface is already suitable, but the use of the HARZO Penetrating Primer is essential!!!
On which surfaces can the product be worn?
HARZO-3 can be applied to almost any wood glazing product. It is not a problem that there is old paint or wallpaper on the wall, it can also be used for it, it should only be prepared as above. In addition, it can be applied to drywall, its position and other surfaces.
Which is important. On nicotine-contaminated surfaces, appropriate anti-nicotine paint should be used before HARZO 3, because nicotine will strike through all layers, no matter how many times the surface is coated.
This applies to rust, iodine, oil or other indelible impurities, but do not use nicotine paint, but a solvent spray based on white acrylic. Preferably just inflate the dirt.
What colours are available?
HARZO-3 products can be ordered in 154 factory colours, but since they can be easily coloured with any water-based colouring paste, different colours can be made at the painting site.
The paste is white, so it is not possible to achieve really dark colours with it, only if you repaint it with the desired dark colour. In addition, it is recommended to colour HARZO 3 in the desired direction.
Is the material washable?
The HARZO-3 cannot be washed on its own, but it can be transferred with HARZO Wall Glaze.
The HARZO-3 product has increased humidity permeability, according to KERMI studies, it releases 252 g of mist per square meter in one day. This is an outstanding value that can only be provided by very little paint.
If you have any questions about HARZO-3, please write to email@example.com e-mail address and we will try to answer as soon as possible.